
Screen Tester
Detect dead, stuck, or hot pixels on screens
Tool categories
Test screens, active pens, webcams, microphones, speakers and acoustic latency in minutes.
44 tools and focused checks

Detect dead, stuck, or hot pixels on screens

Detect if your display runs at 60Hz, 144Hz, 240Hz or higher

Check color accuracy, gradient banding and backlight uniformity
Check your LCD monitor for backlight bleed, IPS glow, and clouding

Test for dead zones, ghost touches and multi-touch on phone or tablet

Test stylus pressure, tilt, twist, buttons, sample rate, jitter and diagonal-line stability

Use a static gray reference to record a camera observation. This page does not flash, measure physical PWM frequency or diagnose eye symptoms.

Visual gamma calibration check using stripe-blend pattern, target sRGB 2.2

Detect pixel response time issues with adjustable-speed moving box on color backgrounds

Check shadow detail with 32 near-black patches, detect crushed blacks

Check highlight detail with 32 near-white patches, detect clipped whites

11-step grayscale ladder to verify brightness, contrast, and gamma calibration

Checkerboard vs 50% gray squint test for contrast and gamma calibration
Compute pixels per inch, dot pitch, aspect ratio and megapixels for any display from resolution + diagonal

Type any two of width, height, or ratio. Auto-simplifies to lowest integer terms and renders a live preview

Compute diagonal, width, height and visible area from aspect ratio plus any one dimension — in inches and cm

Optimal TV/monitor viewing distance by THX (36° FoV), SMPTE (30° FoV), and the 4K/8K resolving-limit

Live frame rate measurement with avg/min/max/1%-low plus 60/120/144/165/240Hz detection

Live readout of screen resolution, native pixels, device pixel ratio, color depth, and gamut

Cycle 8 solid colors, fine checkerboard, and scrolling refresher fullscreen to detect OLED burn-in

Detect Full RGB (0-255) vs Limited (16-235) via near-black and near-white patch grids
Fullscreen gray/black/white/RGB at any brightness to spot clouding, IPS glow, and backlight bleed

Detects dropped or skipped frames at your refresh rate with rAF timestamp analysis and a visual reference bar

Lagom-style 1px pixel grid, multi-size text samples, color-fringing blocks, and an RGB sub-pixel ruler to evaluate display sharpness

Inspect your screen with solid-color patterns for pixels that appear stuck or unlit.

Use a dark screen to inspect visible bright spots, reflections and panel uniformity.

Verify microphone input and audio levels

Test stereo channels and sound output

Try short water-eject tones and compare speaker sound before and after.

Measure acoustic round-trip sound delay with correlated chirps, confidence filtering and jitter

Live relative dB meter with graph, min/avg/max stats, spectrum, microphone selection, and calibration offset

Speaker and headphone channel verifier plus 100 Hz → 10 kHz frequency sweep

Subwoofer and low-frequency sweep (20 Hz → 200 Hz) with ISO 1/3-octave bass presets

Full-range 20 Hz → 20 kHz log sweep with hearing-limit logging and manual tone slider

Measure how fast you respond to a sound cue in milliseconds using the Web Audio API

5.1 and 7.1 channel walk-around to verify speaker wiring, with stereo panning fallback for headphones

Sing or play any note. Get live Hz, nearest note (C0-C8), octave, and cents off perfect pitch

Mosquito tone hearing test - 12 frequencies from 8 kHz to 22 kHz to estimate your hearing age
Analyse high-pitched PC noise with your microphone. Compare a quiet baseline with normal PC activity and inspect frequency, tonal prominence and a live spectrum.
Check audio and video sync with a moving marker and quiet beep. Adjust sound timing to compare speakers, Bluetooth headphones and displays without a download.

Check the placement and balance of stereo playback through your current output device.
They are grouped separately on this page. Use the section links above the cards to jump to display patterns, webcam checks or audio tools.
Only tools that use your camera or microphone need that permission. Screen patterns and speaker playback do not need microphone access. You can revoke a site permission in your browser settings.
No. Results depend on browser support, device settings, playback equipment and the surrounding environment. Browser checks are troubleshooting aids, not hardware certification, calibrated sound-level measurements or a clinical hearing assessment.
The tools and focused checks listed here are free to open in your browser. Some need a compatible browser, hardware support, or permission to use your microphone, camera or sensors.
Try the WASD movement trainer to practice movement keys in five browser games.